CarPro FlyBy30 Windshield and Glass Coating 50 ml Kit

FlyBy30’s advanced Silane barrier technology repels rain from automotive windscreen glass, enhancing visibility, and reducing the need for wipers at speeds above 30mph (45kmh).

This significantly increases driver safety in bad weather, and also helps to reduce the adhesion of snow, ice, and bugs to all treated glass surfaces. FlyBy30 easily withstands windscreen wiper abrasion and regular cleaning, allowing the coating to continue protecting for in excess up to 6 months.

FlyBy30 is the answer to protecting the windshield and exterior glass surface of your vehicle. With FlyBy30 new state of the art materials were composed to create a strong coating on glass windshields and windows. FlyBy30 resists the friction and abrasion from road rash, wipers, dust, car washes, harsh cleansers, and the environment.

FEATURES:

- Ease of use
- Value: Estimated consumption per complete car windscreen and side windows is 10ml
- Perfect Clarity: No haze, smears, or stains
- Provides safe, and high visibility driving in poor weather conditions
- High water drop contact angle (112 deg.) & low sliding angle (15 deg.) promise fast repellency.
- Water repellency on windshields will last minimum of 6~8 month (1 season). Beyond that rain drops will continue to repel but at higher speeds.
- FlyBy30 repels water drops starting at 30 to 40 mph, and allows you to have clear vision with safe driving. *Speed varies based on windshield angle, average tested on 45 deg. Angle.
- FlyBy30 can be used on all car glass allowing safe driving in the rain with clear vision all around.

INCLUDES:

(1) FlyBy30 50ml
(1) Applicator
(2) 4" Microfiber Suede Applicators
(2) Reflective Hologram CQuartz stickers

DIRECTIONS:

- Polish the glass (we suggest to use CarPro Ceriglass by hand or machine. If scratches are present use machine)
- Make sure the surface is free of oil and dirt (we suggest to use CarPro Eraser)
- Let dry completely
- Shake Flyby30, pour a few drops of FlyBy30 on the suede applicator and apply in criss-cross to one side of windshield or one window
- Allow to flash and haze for approximately 1-3 minutes (depending on temps and humidity)
- Start wiping off with a microfiber towel
- For a best result, thoroughly clean the wiper blades and apply CarPro Reload

Full dry time with NO RAIN 12h.
Avoid applying under durect sun.
Do not apply to a wet windshield.