Gtechniq Smart Fabric I1 V3 16.9 fl oz (500 ml)
$42.95
3 in stock
The all-new Smart Fabric still delivers the same superb hydrophobic properties of its predecessor but now has the added enhancement of anti-mold and anti-mildew technology. Preventing mold and mildew growth is crucial as once these microbes take hold of a fabric surface, they can be difficult to remove and can even start to degrade fabric.
I1 Smart Fabric protects all kinds of fabrics from water-based stains. It is breathable and extremely durable, thanks to Gtechniq’s unique scientific formula.
I1 makes ordinary fabrics waterproof and easy to clean. Use it to prevent soaking, swelling or rotting on any fabric. Ideal for use on your cars convertible roof or interior.
Smart Fabric is color safe. Nano particles that make up I1 Smart Fabric coat each fabric fiber individually, leaving the texture unaffected, allowing the material to breathe. This means stale air will still be able to escape, while repelling water and and oil-based liquids.
Top Tip: Smart Fabric can be used on all fabrics including convertible roofs.
Ultra Hydrophobic
Even more hydrophobic than its predecessor, I1 Smart Fabric V3 leaves no remnants of a spillage and moisture simply falls off a coated surface.
Laboratory testing reveals that I1 V3 repels water to the highest standard set by the American Association of Textile Chemists and Colorists (AATCC) – ISO 5. And wash tests reveal the product remains at its full performance level after being washed on a 40 degree cycle, and even after five washes still performs better than its predecessor.
On average I1 will last on a cars interior for between 6 and 12 months – depending how ‘used’ the surface is. On convertible roofs the product will last for up to 2 years.
- All New Formula
- Includes anti-mold and anti-mildew technology
- Lasts up to 12 months
- No change to fabric feel
- Flurocarbon free
Simple Steps To Help You Get The Best Results
- If using on an interior surface, use an APC to prepare the surface you are going to treat
- For exterior use, use an APC or W5 Citrus All Purpose Cleaner neat for dirty surfaces, or dilute at a ratio of 5:1 with water for less soiled areas
- Make sure the surface you have cleaned is thoroughly dry (for best results 48 hours in good drying conditions) before applying I1 Smart Fabric. For the optimal impregnation of I1 into your fabric, its moisture content must be below 15% which is significantly dryer than touch dry
- Shake well before use and wear gloves
- Apply at a temperature of 5°c or above, in a well ventilated area
- Use out of direct sunlight
- Apply by spraying evenly from a distance of about 15cm ensuring thorough saturation of the surface you are covering
- Make sure your application is thorough as once Smart Fabric has dried, you cannot apply a second coat, as the first coat will repel additional product
- Avoid over spraying on surrounding substrates, if this happens, wipe immediately with a microfiber towel. Also wipe any excess from the fabric with a microfiber towel.
- Leave to dry for 24 hours, after this time the full effectiveness of the product will be achieved
- Store in a cool, dry place
- Use within 12 months of opening
- For exterior use, use an APC or W5 Citrus All Purpose Cleaner neat for dirty surfaces, or dilute at a ratio of 5:1 with water for less soiled areas
- Make sure the surface you have cleaned is thoroughly dry (for best results 48 hours in good drying conditions) before applying I1 Smart Fabric. For the optimal impregnation of I1 into your fabric, its moisture content must be below 15% which is significantly dryer than touch dry
- Shake well before use and wear gloves
- Apply at a temperature of 5°c or above, in a well ventilated area
- Use out of direct sunlight
- Apply by spraying evenly from a distance of about 15cm ensuring thorough saturation of the surface you are covering
- Make sure your application is thorough as once Smart Fabric has dried, you cannot apply a second coat, as the first coat will repel additional product
- Avoid over spraying on surrounding substrates, if this happens, wipe immediately with a microfiber towel. Also wipe any excess from the fabric with a microfiber towel.
- Leave to dry for 24 hours, after this time the full effectiveness of the product will be achieved
- Store in a cool, dry place
- Use within 12 months of opening